Meat Grinder
Floor-Standing Meat Grinder, TC Series
2 models from TC-42A to TC-52A
Industrial floor grinder with an oil-bath gearbox, for 650 or 1,300 kg of mince an hour.
- 650 or 1,300 kg per hour
- Oil-bath gearbox with all-steel gears
- Stainless steel housing, meat pan, head and knives
- Head separates from the body for cleaning
- 380V, 4 kW or 5.5 kW
- Output
- 650 kg/h
- Power
- 4 kW
- Voltage
- 380V, 50/60 Hz
- Size
- 1095 × 535 × 930 mm
- Energy
- Electric
In stock at our Davao showroom
Priced by quotation. Call +63 917 627 1915 or download the spec sheet (PDF)
Already have one? Book a service visit
About the range
Built for large butchers, meat plants and big restaurant groups. An oil-bath gearbox with all-steel gears needs no routine maintenance and stands up to years of hard use. The housing and the large meat pan are food-grade stainless steel, the head lifts away from the body for cleaning, and the low-speed, high-torque drive grinds without heating the meat.
Models and specifications
| Model | Output | Power | Voltage | Dimensions | Weight | Head size | Plates | Actions |
|---|---|---|---|---|---|---|---|---|
| TC-42A No. 42 head, 650 kg/h | 650 kg/h | 4 kW | 380V, 50/60 Hz | 1095 × 535 × 930 mm | 107 kg | No. 42 | 6 mm & 8 mm | |
| TC-52A No. 52 head, 1,300 kg/h | 1300 kg/h | 5.5 kW | 380V, 50/60 Hz | 1270 × 630 × 1080 mm | 438 kg | No. 52 | 6 mm & 8 mm |
Specifications are from the manufacturer and may change, so confirm the details you depend on when you request your quotation.
What it is
A meat grinder mixes and minces meat through a plate to a set coarseness, for sausage, burgers and fillings.
How it works
A motor turns a screw that pushes meat through a cutting knife and grinding plate. Plates with different hole sizes control coarseness.
How to use it in the kitchen
- 1
Chill the meat and cut into strips.
- 2
Feed it into the hopper.
- 3
Push gently with the pusher.
- 4
Collect and refrigerate the mince.
Best for
- Butchers and delis
- Restaurants and hotels
- Food producers
Before you buy
- Choose the size by throughput.
- Check 220V or 380V.
- Check plate options.
Care and cleaning
- Disassemble and wash all parts.
- Oil the plate to prevent rust.
- Keep knives sharp.
Questions
Can it grind bones?
No, use a bone saw for bones.