Bag Sealer
Hand Impulse Sealer, 100 to 400 mm
9 models from FS-100A to FS-400B
Press-down bag sealer for plastic bags and pouches, with seal lengths from 100 to 400 mm.
- Seals in about 4 seconds
- Seal lengths 100 to 400 mm
- Plastic or iron body
- Precise heating control
- Runs on 220V
- Power
- 0.16 kW
- Voltage
- 220V
- Energy
- Electric
In stock at our Davao showroom
Priced by quotation. Call +63 917 627 1915 or download the spec sheet (PDF)
Already have one? Book a service visit
About the range
Lay the bag across the bar, press the arm down and the sealer heats for a few seconds to close it neatly. Choose the length to match your widest bag. The A models have a light plastic body, and the B models a sturdy iron body. A precise controller sets the heating time.
Models and specifications
| Model | Power | Voltage | Weight | Sealing width | Sealing length | Sealing thickness | Heating time | Actions |
|---|---|---|---|---|---|---|---|---|
| FS-100A 100 mm, plastic body | 0.16 kW | 220V | 1 kg | 2 mm | 100 mm | 0.1–0.3 mm | 4.2–4.5 s | |
| FS-150A 150 mm, plastic body | 0.18 kW | 220V | 1.12 kg | 2 mm | 150 mm | 0.1–0.3 mm | 4.2–4.5 s | |
| FS-200A 200 mm, plastic body | 0.21 kW | 220V | 1.45 kg | 2–8 mm | 200 mm | 0.1–0.4 mm | 4.2–4.5 s | |
| FS-250A 250 mm, plastic body | 0.22 kW | 220V | 1.4 kg | 2 mm | 250 mm | 0.1–0.4 mm | 4.2–4.5 s | |
| FS-300A 300 mm, plastic body | 0.28 kW | 220V | 2.1 kg | 2–8 mm | 300 mm | 0.1–0.5 mm | 4.2–4.5 s | |
| FS-400A 400 mm, plastic body | 0.47 kW | 220V | 2.96 kg | 3 mm | 400 mm | 0.1–0.5 mm | 4.2–4.5 s | |
| FS-200B 200 mm, iron body | – | – | – | 2–8 mm | 200 mm | 0.1–0.4 mm | 4.2–4.5 s | |
| FS-300B 300 mm, iron body | – | – | – | 2–8 mm | 300 mm | 0.1–0.5 mm | 4.2–4.5 s | |
| FS-400B 400 mm, iron body | – | – | – | 3 mm | 400 mm | 0.1–0.5 mm | 4.2–4.5 s |
Specifications are from the manufacturer and may change, so confirm the details you depend on when you request your quotation.
What it is
A hand sealer closes plastic bags with a heated bar you press by hand, for portion packs, spices and takeaway.
How it works
A short pulse of heat melts the plastic where the two layers meet, and the seal cools quickly under pressure.
How to use it in the kitchen
- 1
Fill the bag and smooth the mouth flat.
- 2
Place it under the bar.
- 3
Press the arm and hold for the cycle.
- 4
Release and check the seal.
Best for
- Small food producers
- Kitchens and bakeries
- Retail packing
Before you buy
- Check the seal length.
- Confirm the thickness range.
- Look at the power.
Care and cleaning
- Keep the bar clean.
- Replace the heating wire.
- Keep it dry.
Questions
What thickness can it seal?
Check the printed sealing thickness on the model.