Hood-Type Dishwasher
Hood-Type Dishwasher with Tables
Model AS-FS60B
Hood dishwasher supplied with inlet and outlet tables for a complete 2.5 m dishwashing line.
- Inlet and outlet tables included
- Up to 60 racks per hour
- Rinse at 82 to 90 °C
- 8 kW on 220V or 380V
- Power
- 8 kW
- Voltage
- 220V or 380V
- Temperature
- 82–90 °C
- Size
- 2500 × 800 × 1500 mm
- Energy
- Electric
In stock at our Davao showroom
Priced by quotation. Call +63 917 627 1915 or download the spec sheet (PDF)
Already have one? Book a service visit
About it
The same 60-rack-an-hour hood dishwasher, set between a dirty-dish inlet table and a clean-dish outlet table. Racks slide straight through, so one person can scrape, wash and unload in a continuous flow.
Specifications
| Model | Power | Voltage | Temperature | Dimensions | Racks per hour | Water per rack | Actions |
|---|---|---|---|---|---|---|---|
| AS-FS60B | 8 kW | 220V or 380V | 82–90 °C | 2500 × 800 × 1500 mm | 60 | 2.5 L |
Specifications are from the manufacturer and may change, so confirm the details you depend on when you request your quotation.
What it is
A hood-type dishwasher washes racks of plates, glasses and trays in a few minutes each, with a hood you lift to load and unload.
How it works
Racks slide into a chamber and the hood closes. Powerful jets spray hot detergent water, then a final rinse sanitises. Racks slide out of the other side on the table.
How to use it in the kitchen
- 1
Scrape and pre-rinse the dishes.
- 2
Load them into a rack and slide it in.
- 3
Lower the hood and start the cycle.
- 4
Slide the rack out and let dishes air-dry.
Best for
- Restaurants and hotels
- Canteens and hospitals
- Catering kitchens
Before you buy
- Check the rack size and cycle times.
- Confirm water, drain and three-phase or single-phase power.
- Plan the dish return and clean layout.
Care and cleaning
- Clean filters and spray arms daily.
- Descale regularly.
- Empty and rinse the tank.
Questions
Does it need a booster heater?
Many need hot water for the final rinse. Check the model and your supply.