Sausage Stuffer
Horizontal Sausage Stuffer, Manual
6 models from SW-3L to PW-7L
Crank sausage stuffer that lies flat on the bench, with a stainless steel or painted body, in 3, 5 and 7 L.
- Low, steady horizontal design
- Stainless steel cylinder, nut and screws
- Four funnels: 10, 20, 30 and 40 mm
- Full stainless steel (SW) or painted body (PW)
- Capacity
- 3 L
- Energy
- Manual
In stock at our Davao showroom
Priced by quotation. Call +63 917 627 1915 or download the spec sheet (PDF)
Already have one? Book a service visit
About the range
The horizontal stuffer sits low and steady on a worktable, which many sausage makers find easier to crank and fill. The cylinder, nut and screws are stainless steel. Choose the SW models in full stainless steel or the PW models with painted side plates, and fill casings with the four funnels supplied: 10, 20, 30 and 40 mm.
Models and specifications
| Model | Capacity | Weight | Cylinder size | Actions |
|---|---|---|---|---|
| SW-3L 3 L, stainless steel | 3 L | 9 kg | Ø140 × 200 mm | |
| SW-5L 5 L, stainless steel | 5 L | 11 kg | Ø140 × 320 mm | |
| SW-7L 7 L, stainless steel | 7 L | 12 kg | Ø140 × 460 mm | |
| PW-3L 3 L, painted | 3 L | 7.5 kg | Ø140 × 200 mm | |
| PW-5L 5 L, painted | 5 L | 11 kg | Ø140 × 320 mm | |
| PW-7L 7 L, painted | 7 L | 12 kg | Ø140 × 460 mm |
Specifications are from the manufacturer and may change, so confirm the details you depend on when you request your quotation.
What it is
A sausage stuffer fills casings with sausage meat, using a piston that pushes the meat through a nozzle.
How it works
A cylinder holds the meat, and a piston is driven by a crank or a motor to push it into the casing.
How to use it in the kitchen
- 1
Fill the cylinder with mixed meat.
- 2
Fit the nozzle and casing.
- 3
Drive the piston.
- 4
Twist into links.
Best for
- Butchers and meat shops
- Restaurants and hotels
- Home-based producers
Before you buy
- Choose the capacity, from 3 L to 15 L.
- Choose vertical, horizontal or electric.
- Check the funnel sizes for your casings.
Care and cleaning
- Disassemble and wash.
- Dry.
- Oil the piston seal.
Questions
Manual or electric?
Manual is simple and low-cost, and electric is faster at volume.