Potato and Fry Cutter
Manual Potato Cutters
3 models from SG-02 to SG-04
Hand-operated French fry cutters and a spiral potato cutter for tornado chips.
- French fries or spiral tornado chips
- No power needed
- Removable knife heads
- Hard-wearing POM guides
- Size
- 430 × 175 × 298 mm
- Energy
- Manual
In stock at our Davao showroom
Priced by quotation. Call +63 917 627 1915 or download the spec sheet (PDF)
Already have one? Book a service visit
About the range
Three hand tools for fry shops and food stalls. The SG-02 lies flat and cuts a whole potato into fries with one pull of the lever, the SG-03 does the same standing upright, and the SG-04 turns a potato into a long spiral for tornado chips. The knife heads come off for cleaning.
Models and specifications
| Model | Dimensions | Weight | Actions |
|---|---|---|---|
| SG-02 Fry cutter, horizontal lever | 430 × 175 × 298 mm | 10 kg | |
| SG-03 Fry cutter, upright lever | – | 7 kg | |
| SG-04 Spiral potato cutter | 250 × 120 × 140 mm | 1.01 kg |
Specifications are from the manufacturer and may change, so confirm the details you depend on when you request your quotation.
What it is
A manual potato chip machine cuts potatoes into spiral chips or straight fries by lever or crank, popular for street-food and kiosk menus.
How it works
A press pushes a potato through a blade grid for fries, and a spiral cutter turns the potato against a blade for tornado chips.
How to use it in the kitchen
- 1
Wash and peel the potato.
- 2
Load and press the lever or turn the crank.
- 3
Fry the cut chips.
- 4
Season and serve.
Best for
- Street-food stalls
- Snack kiosks
- Restaurants
Before you buy
- Check the cut shape and size.
- Confirm mounting or table use.
- Look at blade replacement.
Care and cleaning
- Rinse blades and dry.
- Keep blades sharp.
- Lubricate moving parts.
Questions
Does it need power?
No, these machines are manual.